ti win Plating-Systems

Designed and manufactured in Germany

The excellent design of the ti win plate systems is well adapted to the anatomy and biomechanics of the extremities. The reduced profile height in conjunction with the soft edges of the plate minimizes tissue irritation.

Further Information

The patented polyaxial PTXL screws can be multidirectionally inserted up to 15 ° in the plate holes. The excellent geometry of the plates with the excellent angular stable connection of the screws guarantees a high primary stability. To facilitate implant removal, the surfaces of all [ti] win plates and screws are coated with a high-quality Type II titanium anodization. The titanium anodization significantly reduces the risk of Cold Welding.

The Highlight of the LAPIFIX- and RIFIX-System:

The newly developed VRX lag screw causes a compression on the milled joint gap and then anchors itself angularly stable with the plate. The resulting mechanical stabilization saves the otherwise required plantar screw. To ensure a particularly tight fit in the bone, the surgeon can choose between 2.7 mm and 3.5 mm screws.

The Highlight of the RADIUS- and FIBULA-System:

The newly developed design allows a particularly anatomical reconstruction of the fragments. The difference to conventional radius plates: the distal leg of the plate rises to the ulnar side. Implantation is possible either monoaxially or polyaxially with the aid of a drill block.

Foot – [ti] win LAPIFIX-SYSTEM

Cat. Nr. 200-6500-102-S

LAPIFIX step plates are designed for arthrodesis of the TMT-1 (tarsometatarsal) joint in high-grade deformities. The plate is available in 3 mm, 5 mm and 8 mm increments for optimal correction and arthrodesis.

Properties:

Plates and Screws:
– Titanium alloy TI 6AI 4V
– Surface coating titanium anodized according to type II

Portfolio:
– 3 plates with 3 mm, 5 mm and 8 mm steps
– Polyaxial angular stable 2.7 mm PTXL screws
– Optionale Single use Instrumenten Kit available
– Angular stable 2.7 mm VRX compression screws
– Plates and screws single packed sterile

Foot – [ti] win RIFIX-SYSTEM

Cat. NR. 200-6500-101-S

RIFIX angle-stable titanium plates are designed for the arthrodesis of the MTP1 joint. For optimum adaptation to the rolling motion of the foot, the plate is available in extension angles of 7 ° and 12 °.

Properties:

Plates and screws:
– Titanium alloy TI 6AI 4V
– Surface coating titanium anodized according to type II

Portfolio

–2 plates with 7 ° and 12 ° extension angle
– Polyaxial angular stable 2.7 mm PTXL screws
– Angular stable 2.7 mm VRX compression screws
– Optionale Single use Instrumenten Kit available
– Optional convex and concave reamer
– Plates and screws single packed sterile

Foot – [ti] win VAFIX-SYSTEM

Cat. 200-6500-100-S Wedge plates
Cat. 200-6500-110-S Plates without a wedge

VAFIX plates are designed for the open-wedge surgical technique of the Halux Valgus primo-varus. The amount of bending at the level of the osteotomy is adjusted to the size of the wedge. For the best possible correction, 6 plates with different wedge sizes are available.

Properties:

Platten und Schrauben:
– Titanium alloy TI 6AI 4V
– Surface coating titanium anodized according to type II

Portfolio
– 6 Wedge Plates
– 6 Plates without Wedge
– Polyaxial angular stable 2.7 mm PTXL screws
– Optionale Single use Trial Plates available
– Optionale Single use Instrumenten Kit available

Hand – [ti] win RADIUS-SYSTEM

The 2.7 mm distal radius system is indicated for the treatment of intra- and extra-articular fractures as well as osteotomies of the distal radius. With the help of the polyaxial, funnel-shaped screw-in drill sleeve, you can insert the PTXL screws into the plate holes at a freely selectable angle of up to 15 °.

Properties:

Plates and screws:
– Titanium alloy TI 6AI 4V
– Surface finish titanium anodized according to type II

Portfolio:
– Distal radius plate, standard, 7/3 hole, right and left
– Polyaxial angle stable 2.7 mm PTXL screws
– Monoaxial and polyaxial fixation possible
– Single use instruments available separately on request

Hand – [ti] win FIBULA-SYSTEM

The 2.7 mm angular stable distal fibula system is indicated for the treatment of the isolated fibular fracture or the fibular fracture in the context of complex ankle injuries. The various screw connection options in the distal part offer advantages, particularly in the case of severe osteoporosis. The anatomical design of the [ti] win Fibula Plate is unique. The screw angles specified in the plate are optimally adapted to the anatomical conditions of the fibula.

Properties:

Plates and screws:
– Titanium alloy TI 6AI 4V
– Surface finish titanium anodized according to type II

Portfolio
– Distal fibula plate 7/6 holes, right and left
– Polyaxial angle stable 2.7 mm PTXL screws
– Monoaxial and polyaxial fixation possible
– Single use instruments available separately on request